Retry failed rebind attempts

When we receive a migration, if rebinding to the new listen address and
port fails for a reason which might be fixable, rather than killing the
server we retry once a second.  Also in this patch: non-overlapping log
messages and a fix for the client going away halfway through a sendfile
loop.

src/client.c

@@ -366,7 +366,11 @@ void client_reply_to_read( struct client* client, struct nbd_request request )
 	client_write_reply( client, &request, 0);
 
 	offset = request.from;
-	FATAL_IF_NEGATIVE(
+
+	/* If we get cut off partway through this sendfile, we don't
+	 * want to kill the server.  This should be an error.
+	 */
+	ERROR_IF_NEGATIVE(
 			sendfileloop(
 				client->socket, 
 				client->fileno, 

src/serve.c

@@ -192,6 +192,62 @@ int server_port( struct server * server )
 }
 
 
+/* Try to bind to our serving socket, retrying until it works or gives a
+ * fatal error. */
+void serve_bind( struct server * serve )
+{
+	int bind_result;
+
+	char s_address[64];
+	memset( s_address, 0, 64 );
+	strcpy( s_address, "???" );
+	inet_ntop( serve->bind_to.generic.sa_family,
+			sockaddr_address_data( &serve->bind_to.generic),
+			s_address, 64 );
+
+	do {
+		bind_result = bind(
+				serve->server_fd, 
+				&serve->bind_to.generic,
+				sizeof(serve->bind_to));
+
+		if ( 0 == bind_result ) {
+			info( "Bound to %s port %d", 
+					s_address, 
+					ntohs(serve->bind_to.v4.sin_port));
+			break;
+		}
+		else {
+
+			warn( "Couldn't bind to %s port %d: %s", 
+					s_address, 
+					ntohs(serve->bind_to.v4.sin_port),
+					strerror( errno ) );
+
+			switch (errno){
+				/* bind() can give us EACCES,
+				 * EADDRINUSE, EADDRNOTAVAIL, EBADF,
+				 * EINVAL or ENOTSOCK.
+				 *
+				 * Any of these other than EACCES, 
+				 * EADDRINUSE or EADDRNOTAVAIL signify
+				 * that there's a logic error somewhere.
+				 */
+				case EACCES:
+				case EADDRINUSE:
+				case EADDRNOTAVAIL:
+					debug("retrying");
+					sleep(1);
+					continue;
+				default:
+					fatal( "Giving up" );
+			}
+		}
+	} while ( 1 );
+}
+
+
+
 /** Prepares a listening socket for the NBD server, binding etc. */
 void serve_open_server_socket(struct server* params)
 {
@@ -205,21 +261,32 @@ void serve_open_server_socket(struct server* params)
 	FATAL_IF_NEGATIVE(params->server_fd, 
 	  "Couldn't create server socket");
 
+	/* We need SO_REUSEADDR so that when we switch from listening to
+	 * serving we don't have to change address if we don't want to.
+	 *
+	 * If this fails, it's not necessarily bad in principle, but at
+	 * this point in the code we can't tell if it's going to be a
+	 * problem.  It's also indicative of something odd going on, so
+	 * we barf.
+	 */
 	FATAL_IF_NEGATIVE(
 		setsockopt(params->server_fd, SOL_SOCKET, SO_REUSEADDR, &optval, sizeof(optval)),
 		"Couldn't set SO_REUSEADDR"
 	);
 
+	/* TCP_NODELAY makes everything not be slow.  If we can't set
+	 * this, again, there's something odd going on which we don't
+	 * understand.
+	 */
 	FATAL_IF_NEGATIVE(
 		setsockopt(params->server_fd, IPPROTO_TCP, TCP_NODELAY, &optval, sizeof(optval)),
 		"Couldn't set TCP_NODELAY"
 	);
 
-	FATAL_IF_NEGATIVE(
-		bind(params->server_fd, &params->bind_to.generic,
-		  sizeof(params->bind_to)),
-		"Couldn't bind server to IP address"
-	);
+	/* If we can't bind, presumably that's because someone else is
+	 * squatting on our ip/port combo, or the ip isn't yet
+	 * configured. Ideally we want to retry this. */
+	serve_bind(params);
 	
 	FATAL_IF_NEGATIVE(
 		listen(params->server_fd, params->tcp_backlog),

src/util.c

@@ -45,12 +45,23 @@ void mylog(int line_level, const char* format, ...)
 {
 	va_list argptr;
 
+	
 	if (line_level < log_level) { return; }
 	
+	/* Copy the format sideways so that we can append a "\n" to it
+	 * and avoid a second fprintf. This stops log lines from getting
+	 * interleaved.
+	 */
+	int format_len = strlen( format );
+	char *format_n = xmalloc( format_len + 2 );
+	memcpy( format_n, format, format_len );
+	format_n[format_len] = '\n';
+
 	va_start(argptr, format);
-	vfprintf(stderr, format, argptr);
+	vfprintf(stderr, format_n, argptr);
 	va_end(argptr);
-	fprintf(stderr, "\n");
+
+	free( format_n );
 }
 
 void* xrealloc(void* ptr, size_t size)

tests/acceptance/environment.rb

@@ -5,7 +5,7 @@ require 'file_writer'
 
 class Environment
   attr_reader( :blocksize, :filename1, :filename2, :ip,
-               :port1, :port2, :nbd1, :nbd2, :file1, :file2 )
+               :port1, :port2, :nbd1, :nbd2, :file1, :file2, :rebind_port1 )
 
   def initialize
     @blocksize = 1024
@@ -14,9 +14,11 @@ class Environment
     @ip = "127.0.0.1"
     @available_ports = [*40000..41000] - listening_ports
     @port1 = @available_ports.shift
+    @rebind_port1 = @available_ports.shift
     @port2 = @available_ports.shift
-    @nbd1 = FlexNBD.new("../../build/flexnbd", @ip, @port1)
-    @nbd2 = FlexNBD.new("../../build/flexnbd", @ip, @port2)
+    @rebind_port2 = @available_ports.shift
+    @nbd1 = FlexNBD.new("../../build/flexnbd", @ip, @port1, @ip, @rebind_port1)
+    @nbd2 = FlexNBD.new("../../build/flexnbd", @ip, @port2, @ip, @rebind_port2)
 
     @fake_pid = nil
   end
@@ -95,6 +97,7 @@ class Environment
     end
 
 
+    @nbd1.can_die(0)
     @nbd1.kill
     @nbd2.kill
 
@@ -104,7 +107,7 @@ class Environment
   end
 
 
-  def run_fake( name, addr, port )
+  def run_fake( name, addr, port, rebind_addr = addr, rebind_port = port )
     fakedir = File.join( File.dirname( __FILE__ ), "fakes" )
     fake = Dir[File.join( fakedir, name ) + "*"].sort.find { |fn|
       File.executable?( fn )
@@ -113,8 +116,11 @@ class Environment
     raise "no fake executable" unless fake
     raise "no addr" unless addr
     raise "no port" unless port
+    raise "no rebind_addr" unless rebind_addr
+    raise "no rebind_port" unless rebind_port
+
     @fake_pid = fork do
-      exec fake + " " + addr.to_s + " " + port.to_s + " " + @nbd1.pid.to_s
+      exec [fake, addr, port, @nbd1.pid, rebind_addr, rebind_port].map{|x| x.to_s}.join(" ")
     end
     sleep(0.5)
   end

tests/acceptance/fakes/dest/close_after_entrust.rb

@@ -24,5 +24,6 @@ client.close
 client2 = server.accept
 client2.receive_mirror
 
+
 exit(0)
 

tests/acceptance/fakes/source/close_after_entrust_reply.rb

@@ -9,7 +9,7 @@
 require 'flexnbd/fake_source'
 include FlexNBD
 
-addr, port, srv_pid = *ARGV
+addr, port, srv_pid, rebind_addr, rebind_port = *ARGV
 
 client = FakeSource.new( addr, port, "Timed out connecting" )
 client.read_hello
@@ -25,8 +25,8 @@ sleep(0.25)
 client2 = FakeSource.new( addr, port, "Timed out reconnecting to mirror" )
 client2.send_mirror
 
-sleep(0.25)
-client3 = FakeSource.new( addr, port, "Timed out reconnecting to read" )
+sleep(1)
+client3 = FakeSource.new( rebind_addr, rebind_port, "Timed out reconnecting to read" )
 client3.close
 
 exit(0)

tests/acceptance/fakes/source/close_mid_read.rb

@@ -0,0 +1,17 @@
+#!/usr/bin/env ruby
+
+# Connect, but get the protocol wrong: don't read the hello, so we
+# close and break the sendfile.
+
+require 'flexnbd/fake_source'
+include FlexNBD
+
+addr, port, srv_pid, newaddr, newport = *ARGV
+
+client = FakeSource.new( addr, port, "Timed out connecting" )
+client.write_read_request( 0, 8 )
+client.read_raw( 4 )
+client.close
+
+
+exit(0)

tests/acceptance/fakes/source/successful_transfer.rb

@@ -0,0 +1,29 @@
+#!/usr/bin/env ruby
+
+# Successfully send a migration, but squat on the IP and port which
+# the destination wants to rebind to.  The destination should retry
+# every second, so we give it up then attempt to connect to the new
+# server.
+
+require 'flexnbd/fake_source'
+include FlexNBD
+
+addr, port, srv_pid, newaddr, newport = *ARGV
+
+squatter = TCPServer.open( newaddr, newport.to_i )
+
+client  = FakeSource.new( addr, port, "Timed out connecting" )
+client.send_mirror()
+
+sleep(1)
+
+squatter.close()
+
+sleep(1)
+
+client2 = FakeSource.new( newaddr, newport.to_i, "Timed out reconnecting" )
+client2.read_hello
+client2.read( 0, 8 )
+client2.close
+
+exit( 0 )

tests/acceptance/flexnbd.rb

@@ -166,7 +166,7 @@ end # class ValgrindExecutor
 # Noddy test class to exercise FlexNBD from the outside for testing.
 #
 class FlexNBD
-  attr_reader :bin, :ctrl, :pid, :ip, :port
+  attr_reader :bin, :ctrl, :pid, :ip, :port, :rebind_ip, :rebind_port
 
   class << self
     def counter
@@ -187,7 +187,7 @@ class FlexNBD
   end
 
 
-  def initialize(bin, ip, port)
+  def initialize(bin, ip, port, rebind_ip = ip, rebind_port = port)
     @bin  = bin
     @debug = (ENV['DEBUG'] && `#{@bin} serve --help` =~ /--verbose/) ? "--verbose" : ""
     raise "#{bin} not executable" unless File.executable?(bin)
@@ -195,6 +195,8 @@ class FlexNBD
     @ctrl = "/tmp/.flexnbd.ctrl.#{Time.now.to_i}.#{rand}"
     @ip = ip
     @port = port
+    @rebind_ip = rebind_ip
+    @rebind_port = rebind_port
     @kill = []
   end
 
@@ -224,6 +226,8 @@ class FlexNBD
       "--addr #{ip} "\
       "--port #{port} "\
       "--file #{file} "\
+      "--rebind-addr #{rebind_ip} " \
+      "--rebind-port #{rebind_port} " \
       "--sock #{ctrl} "\
       "#{@debug} "\
       "#{acl.join(' ')}"

tests/acceptance/flexnbd/fake_source.rb

@@ -54,12 +54,28 @@ module FlexNBD
       send_request( 2, handle )
     end
 
+    def write_read_request( from, len, handle="myhandle" )
+      send_request( 0, "myhandle", from, len )
+    end
+
 
     def write_data( data )
       @sock.write( data )
     end
 
 
+    # Handy utility
+    def read( from, len )
+      timing_out( 2, "Timed out reading" ) do
+        send_request( 0, "myhandle", from, len )
+        read_raw( len )
+      end
+    end
+
+    def read_raw( len )
+      @sock.read( len )
+    end
+
     def send_mirror
       read_hello()
       write_write_request( 0, 8 )

tests/acceptance/test_dest_error_handling.rb

@@ -34,6 +34,10 @@ class TestDestErrorHandling  < Test::Unit::TestCase
   end
 
 
+  def test_partial_read_causes_error
+    run_fake( "source/close_mid_read" )
+  end
+
   def test_double_connect_during_hello
     run_fake( "source/connect_during_hello" )
   end
@@ -72,18 +76,32 @@ class TestDestErrorHandling  < Test::Unit::TestCase
     # This fake runs a failed migration then a succeeding one, so we
     # expect the destination to take control.
     run_fake( "source/close_after_entrust_reply" )
+    assert_control
   end
 
+
+  def test_cant_rebind_retries
+    run_fake( "source/successful_transfer" )
+  end
+
+
   private
   def run_fake( name )
-    @env.run_fake( name, @env.ip, @env.port1 )
+    @env.run_fake( name, @env.ip, @env.port1, @env.ip, @env.rebind_port1 )
     assert @env.fake_reports_success, "#{name} failed."
   end
 
+  def status
+    stat, _ = @env.status1
+    stat
+  end
+
   def assert_no_control
-    status, stderr = @env.status1
     assert !status['has_control'],  "Thought it had control"
   end
 
+  def assert_control
+    assert status['has_control'], "Didn't think it had control"
+  end
 
 end # class TestDestErrorHandling

tests/acceptance/test_source_error_handling.rb

@@ -80,6 +80,7 @@ class TestSourceErrorHandling < Test::Unit::TestCase
 
 
   def test_post_entrust_disconnect_causes_retry
+    @env.nbd1.can_die(0)
     run_fake( "dest/close_after_entrust" )
   end